Laser cutter

This article is part of: computer-controlled-cutting.

The laser cutter is an excellent machine: it gives quick results, it is easy to learn, it works with different types of material (wood, acrylic, cardboard, etc.) and the cutting is very precise. Using joints allows you to go from 2D to 3D objects. It makes the laser cutter one of the best machines to quickly prototype an idea.


Basics of lasercutting


Because the lasercutter is fun and easy to use, it's also easy to forget that it can be dangerous. Here are some basic rules that accompany the use of the machine:

  • Do not leave the machine unattended
  • Cut only materials that you know are safe (no chromium, no carbon, no PVC, no PVP)
  • Always use the filter and wait for the smoke to disappear before opening the cover
  • Make sure you know what to do in case of fire


The focus is calculated based on the distance between the material and the laser. It must be adjusted before any cutting, depending on the thickness of the material. Also, keep in mind that the focal length varies depending on the lens you use, more information about this here.

Setting the focus is a mechanical & low-tech process, the idea is simply to obtain the distance value between the nozzle and the material.

Speed & power

Speed and power are the two parameters that we have to adjust according to the desired results. The speed is defined in millimeters per second (0-400) and the power is defined in (a relative) percentage (0-100%). To cut something big, you will need to set a high power and a low speed, so that the laser stays longer at the same points and burns the material more. On the other hand, to slightly engrave, set a high speed and a low power, so that the laser does not have enough time to burn the material.



The laser burns away a portion of material when it cuts through. This is known as the laser kerf and ranges from 0.08mm – 1mm depending on the material properties and thickness. It is super important the know the kerf value and to integrate it into the design, if we want to cut things perfectly.

Get to know the machine

I'm part of two different groups for the group assignement, simply because I was around and it's always good to know a bit more about the differences between the machines.

Trotec Speedy 100

The first group I'm part of is composed by Arman, Benjamin, David, Minh Tue, and me.

We used this test file provided by the instructors to test the lasercutter Trotec Speedy 100 with different materials. Here are the specs of the machine:

  • Work area: 600 x 300mm
  • Height: 132mm
  • Laser power: 12-60W

We chose to proceed with Cardboard 4mm and Plywood 4mm because we can find nice leftovers of those materials. For the Material Settings in TROTEC JobControl, we followed the information on the Laser Cut Sample at the Fab Lab. The parts to be engraved were color-coded with black, and the parts to be cut were color-coded with red.


Here are the values we collected when testing the Trotec Speedy 100.

Machine Material Technique Speed Power
Trotec Speedy 100 Plywood 4mm Engrave 100 80
Trotec Speedy 100 Plywood 4mm Cut 1 75
Trotec Speedy 100 Carboard 4mm Engrave 100 60
Trotec Speedy 100 Carboard 4mm Cut 1 60

Multicam 2000

And the other group I'm part of is composed by Bruno, Marco, Roger, and me.

Our idea was to use one of the Trotec machines, either the 100 or the 400, but they were being used so we finally decided to do it on the old and huge Multicam 2000. Our instructors Mikel Llobera & Oscar González Fernández helped us throught the process. This would have been really impossible without them, given the complicated interface of the machine, not to mention that some parts of it are not working properly.


On the multicam, you have to go through it's own software called EnRoute, that turns a DXF file into gcode that the machine can read. With EnRoute open and connected to the machine, you can load the file from it's 1980's-style handheld interface, which is both cumbersome and amusing at the same time.


Once we had the piece on EnRoute, after a few crashes of the software due, we think, to the amount of different lines on the design, we learned that we would have issues with raster on that machine, so we had to remove the parts of the design that were supposed to be rastered.

We didn't do enough tests to know well the machine because of the time we had at our disposition. It would be interesting to compare the results with the other machine to know how much energy it does require and how fast is the industrial machine compare to the others. Anyway, here are the values we collected when testing the Multicam2000.

Machine Material Technique Speed Power
Multicam 2000 Cardboard 4mm Cut 100 100

Basic test to calculate the kerf

I have seen on various documentations a basic test which we can execute in order to calculate the kerf of a specific machine on a specific material. We wanted to test it by ourself.


The idea is to cut a material several times, bring the cut pieces together and compare the final total width with the initial width. The difference should be the space left by the cut, from which we can get the value of the kerf.

Material Intended Actual Difference Kerf (difference/10) Offset (kerf/2)
Cardboard 4mm 200mm 194mm 6mm 0.3mm 0.15mm

This technique could be applied to different materials with different settings (speed/power) by using this single template.


Created 15/02/2020

Updated 15/02/2020